CHARACTERISTICS OF THE TRANSMITTER:
Overall dimensions: 163 x 49 x 45 mm
Power supply: 2 AA.
The rotary key can be replaced by the START button (optional)
CHARACTERISTICS OF THE RECEIVER:
Overall dimensions: 167 x 154 x 88 mm
Weight: 1400g (including cable)
Power supply: AC type: 24/48/110/220 / 380V; DC type: 12 ~ 24V
Frequency control: “Crystal”.
Low battery indicator.
Range: up to 100 meters.
Operating temperature: -45 ~ + 80 ℃.
Body Material: Fiberglass.
Moisture / dustproof / shockproof IP65 housing.
Modern radio control crane, with programmable features. The device has an elegant design and no external transmitter antenna (internal antenna).
SAGA1-L10 has the ability to install both inside the electrical cabinet, and outside, is fixed to 1 special metal bolt with shock absorber (included).
The device uses to transmit the signal, the frequency resonator “Quartz”. To ensure signal encryption and create security of use, the signal is encrypted with a special ID code (set by the manufacturer and has more than 4 billion combinations that never repeat). The SAGA1-L10 uses a modern coding system.
The manufacturer SAGA1-L10 increased the safety of the device. Radio control is resistant to voltage drops, load transformer + 20%. The case of the device is protected from dust and moisture, as the case is impact-resistant, the degree of protection is IP65.
The developers of the SAGA1-L10 radio control have provided modern connectors for connecting the tip-sleeve.
The power supply of the radio control receiver by the SAGA1-L10 crane can be changed from 220V to 380V (installation of another transformer to power the 24 V receiver is possible); a jumper is provided for this in the receiver (you can find a more detailed description in the operating instructions).
The power supply of the SAGA1-L10 radio transmitter is provided by two AA alkaline batteries, and the transmitter also has an LED that signals when the batteries are low (blinking three colors, red, yellow, green).
The SAGA1-L10 crane control device has the ability to program independent transmitter buttons, as well as switch them to the ON / OFF mode (trigger mode), adjust the third motor speed and control additional equipment (electric traverse, grab, electromagnet, etc.). ).
The optimal distance for transmitting the signal from the transmitter to the receiver can be up to 100 m, the distance depends on the third-party equipment used in the workshop, which creates radio frequency interference.
Transmitter power SAGA1-L10 is quite high 10mA, for devices of short range.
The body of the radio control of the crane has a high strength, as it is made with the use of fiberglass, which ensures reliable impact resistance of the equipment.
The certificate of conformity on the crane radio control is attached to the shipping documents.
The warranty for radio control crane SAGA1-L10 is 1 year.